Tech Specs
| Packaging | Box - 168/pallet |
| Width | • |
| Length | • |
| Thickness | • |
| Weight | 5lbs • 2kg |
Usage
Formaldehyde Spill Kits are designed to provide a safe method of
cleaning up and reducing the vapors from formaldehyde leaks and spills.
INSTRUCTIONS FOR USE:
- Appropriate personal protective equipment is recommended.
- Position pads around outer edge of spill for containment.
- Open the Formaldehyde Solidifier shaker bottle and evenly shake over the spill from the outer edge of
the spill in towards the center using care not to splash.
- Use the recommended polymerizing ratio of one-pound (1#) or .45 kg Formaldehyde Solidifier to the formaldehyde concentration:
CONCENTRATION AMOUNT POLYMERIZED
PERCENTAGE BY WEIGHT (GALLONS/PINTS)
37%…..0.1 / .8
30%…..0.13 / 1.04
20%…..0.2 / 1.6
15%…..0.27 / 2.16
10%…..0.41 / 3.28
- Carefully stir the Formaldehyde Solidifier into the formaldehyde spill with a non-reactive utensil using care to avoid splashing the spill.
- Spill will begin to solidify within ten (10) minutes for formaldehyde solution strengths greater than 15% by concentration weight and within fifteen (15) minutes for solutions of less than 15% concentration by weight. In some instances of lower formaldehyde concentrations, solidification may not occur.
- Allow several minutes for the formaldehyde to become solid. NOTE: The Formaldehyde Solidifier will only solidify the formaldehyde leaving a water-based spill.
- To complete the solidification of the spill, shake the AQUALOCKIT® over the spill area to solidify any water-based liquid that may remain.
- Allow several additional minutes for the AQUALOCKIT® to complete the solidification process.
- Apply additional AQUALOCKIT® until spill is solidified for easy disposal.
- Dispose of the solidified spill and sorbents in accordance with local, state and federal regulations.
Components
• (1) Formaldehyde Solidifier, 2# (0.9kg) Shaker Bottle (480001)
• (1) AQUALOCKIT® 2# (0.9kg) Shaker Bottle (670001)
• (2) 12”x12” Hazmat Pads (S2-71)
• (1) Scoop w/Detachable Scraper
• (1 pr.) Nitrile Gloves, (1 pr.) Goggles
• (1) Disposal Bag & Twist Tie
• (1) Disposal Label