| Features/Benefits Formaldehyde Solidifier is ideal for quick response in spill prone areas. Suppresses the vapor as well as solidifies the Formaldehyde for easier disposal.
INSTRUCTIONS FOR USE:
- Appropriate personal protective equipment is recommended.
- Position pads around outer edge of spill for containment.
- Open the Formaldehyde Solidifier shaker bottle and evenly shake over the spill from the outer edge of
the spill in towards the center using care not to splash.
- Use the recommended polymerizing ratio of one-pound (1#) or .45 kg Formaldehyde Solidifier to the formaldehyde concentration:
[CONCENTRATION PERCENTAGE BY WEIGHT]…..(AMOUNT POLYMERIZED; GALLONS/PINTS)
[37%]…..(0.1 / .8)
[30%]…..(0.13 / 1.04)
[20%]…..(0.2 / 1.6)
[15%]…..(0.27 / 2.16)
[10%]…..(0.41 / 3.28)
- Carefully stir the Formaldehyde Solidifier into the formaldehyde spill with a non-reactive utensil using care to avoid splashing the spill.
- Spill will begin to solidify within ten (10) minutes for formaldehyde solution strengths greater than 15% by concentration weight and within fifteen (15) minutes for solutions of less than 15% concentration by weight. In some instances of lower formaldehyde concentrations, solidification may not occur.
- Allow several minutes for the formaldehyde to become solid. NOTE: The Formaldehyde Solidifier will only solidify the formaldehyde leaving a water-based spill.
- To complete the solidification of the spill, shake the AQUALOCKIT® over the spill area to solidify any water-based liquid that may remain.
- Allow several additional minutes for the AQUALOCKIT® to complete the solidification process.
- Apply additional AQUALOCKIT® until spill is solidified for easy disposal.
- Dispose of the solidified spill and sorbents in accordance with local, state and federal regulations.
|
