The First Step in Spill Control: IDENTIFY THE SPILL–Chemical and Wastewater Classifier Products are the perfect method for distinguishing risks in unknown spilled liquids. Classifier Strips quickly assist the responder in classifying the spill for proper treatment. Recommended for all Emergency Response Teams.
Color Change process lets you know when Acids are safe to handle-Minimize the Risk! Many aggressive liquid spills involve hazardous acids that require a way to render them safe for final clean-up and disposal in accordance with local, state and federal regulations. KOLOR-SAFE®
Neutralizers meet this requirement.
Mercury Spill Control: OSHA Hospital Recommendations:
“...Use mercury spill kits to help clean up small spills of 25ml or less. Kits should contain gloves, protective glasses, Hg absorb powder, mercury sponges, and a disposal bag.”
MERCURY SPILL CONTROL
AQUALOCKIT® Bulk (5 Gallon Bucket)
PRODUCT #
DESCRIPTION
PACKAGING
OTHER:
442101
"A" 2# Shaker Bottle For Acids with a
concentration less than 40%
KOLOR-LOCK® takes the guesswork out of knowing when an acid is neutralized through its 3-color change indicator process. AQUALOCKIT® is ideal for easy and effective clean-up of contaminated water, sludge, neutralized acids or bases or low-level radioactive water.
Regulations (Standards - 29 CFR) Formaldehyde. - 1910.1048
1910.1048(j)(2)
In work areas where spillage may occur, the employer shall make provisions to contain the spill, to decontaminate the work area, and to dispose of the waste.
• Gapseal® Plugging Compound temporarily stops non-aggressive and hydrocarbon-based leaks.
• Great for leaks from punctured drums, storage containers, etc.
• Made from flexible, reusable, and washable polyurethane.
• Easily decontaminated for later use.
• Withstands temperatures ranging from -2¾F to 200¾F. (-32¾ C to 93¾ C)
• Easily cut to fit unique areas.
DRAINGUARD® MATS
PRODUCT #
DESCRIPTION
PACKAGING
OTHER:
882100
10'x4"x2.25" Orange Spill Berm
1/case
MSDS
882101
Spill Berm Connector Pieces
1/case
MSDS
822102
Spill Berm Corner Pieces
1/case
MSDS
• Unique urethane material “seeps” into small cracks and crevices to seal off liquid flow.
• Spilfyter® Spill Berms are non-absorbing and are easily cleaned for repeated use.
SPILL BERMS
PRODUCT #
DESCRIPTION
PACKAGING
OTHER:
RCC7018
Small pH Roll; 93
N/A
MSDS
RCC7020
Jumbo pH Roll, (0.5" diameter); HJ613
N/A
MSDS
PH PAPERS
PRODUCT #
DESCRIPTION
OTHER:
680041
(Decon 1) For unkown contaminants such as inorganic acis, PBBs
• Designed for decontamination of Personal Protective Equipment (PPE), tools and surfaces at hazardous material incidences or waste sites.
• Decontamination solutions require no dilution and are phosphate free.
• Not for use on skin.
*Decon Solutions 1, 2, 3, and 4 are hazardous for ALL shipping methods (due to the corrosive nature of one of the components). Each of these is labeled as such.\
Decon Solution 4 is non hazardous.
When shipping internationally the following must occur:
Solutions 1, 2, 3 and 5 must be on a different container then Solution number 4. Solution number 4 must ship separately from the others