| |
 |
|
|
 |
| OSHA 29 CFR 1910.120(j)(1)(viii) states: |
| Where major spills may occur, a spill containment program, which is part of the employer's safety and health program required in paragraph (b) of this section, shall be implemented to contain and isolate the entire volume of the hazardous substance being transferred. |
| OSHA 29 CFR 1910.22(a)(2) states: |
| Floors in your workplace should be "maintained in a clean and, so far as possible, a dry condition." Where wet processes are used, drainage shall be maintained, and false floors, platforms, mats, or other dry standing places should be provided where practicable. |
|
|
|
|
|
 |
| IDENTIFYING SPILLS: |
OSHA 1910.120(q)(3)(ii):
The individual in charge of the ICS shall identify, to the extent possible, all hazardous substances or conditions present and shall address as appropriate site analysis, use of engineering controls, maximum exposure limits, hazardous substance handling procedures, and use of any new technologies. |
|
|
|
|
 |
| POWERED INDUSTRIAL TRUCKS. - 1910.178 |
1910.178(g)(2)–Facilities shall be provided for flushing and neutralizing spilled electrolyte, for fire protection, for protecting charging apparatus from damage by trucks, and for adequate ventilation for dispersal of fumes from gassing batteries. |
| HAZARDOUS WASTE OPERATIONS & EMERGENCY MGMT. - 1910.120 |
1910.120(k)(2)(i)–A decontamination procedure shall be developed, communicated to employees and implemented before any employees or equipment may enter areas on site where potential for exposure to hazardous substances exists. |
|
|
| |
|
|
|
|
