NPS Safety & Regulations

Only NPS and Spilfyter® can provide you with the spill control products to satisfy all of The Seven Steps to Spill Control.

step1.jpg

1) Develop a Contingency Plan

Learn more

OSHA requires facilities to keep enough spill control products on hand to contain and clean the largest spill possible. Spilfyter® Kits provide a quick response to spills in almost any environment.

ARE YOU IN COMPLIANCE?…OSHA 29 CFR 1910.120(j)(1)(viii) states:

Where major spills may occur, a spill containment program, which is part of the employer’s safety and health program required in paragraph (b) of this section, shall be implemented to contain and isolate the entire volume of the hazardous substance being transferred.

step2.jpg

2) Stop the Spill at It's Source

Learn more

Use Gapseal® to temporarily stop leaks from tanks or drums; use Spilfyter® Socks & pillows to create a barrier against the spill.

ARE YOU IN COMPLIANCE?…OSHA 29 CFR 1910.22(a)(2) states:

Floors in your workplace should be “maintained in a clean and, so far as possible, a dry condition.” Where wet processes are used, drainage shall be maintained, and false floors, platforms, mats, or other dry standing places should be provided where practicable.

step3.jpg

3) Identify the Spill

Learn more

Spilfyter® Classifier Kits and Strips aid in identifying unknown spills.

ARE YOU IN COMPLIANCE?…OSHA 1910.120(q)(3)(ii)

The individual in charge of the ICS (Incident Control System) shall identify, to the extent possible, all hazardous substances or conditions present and shall address as appropriate site analysis, use of engineering controls, maximum exposure limits, hazardous substance handling procedures, and use of any new technologies.

step4.jpg

4) Contain the Spill

Learn more

Use Spilfyter® Socks to contain spills on solid surfaces; use Booms or Sweeps to surround and absorb spills on water.

ARE YOU IN COMPLIANCE?…OSHA 29 CFR 1910.22(a)(2) states:

Floors in your workplace should be “maintained in a clean and, so far as possible, a dry condition.” Where wet processes are used, drainage shall be maintained, and false floors, platforms, mats, or other dry standing places should be provided where practicable.

step5.jpg

5) Minimize the Risk

Learn more

Use KOLOR-LOCK® Acid and Base Neutralizers , and Vapor Suppressors to stabilize the spill before absorption and disposal.

MINIMIZE THE RISK WITH ACID/BASE NEUTRALIZERS:

Color Change process lets you know when Acids/Bases are safe to handle. Many aggressive liquid spills involve hazardous acids that require a way to render them safe for final clean-up and disposal.

step6.jpg

6) Pick up the Spill

Learn more

Use Spilfyter's complete assortment of Sorbents: Oil-Only, Universal, Cellulose-Based, Hazmat and Static Resistant to absorb the spill.

NPS offers a full line of Quality Sorbents and Spill Kits designed to absorb and contain spills ranging from hydrocarbon-based liquids to non-aggressive and aggressive chemicals.

step7.jpg

7) Decontaminate

Learn more

NPS offers a variety of Neutralizers, Solidifiers and Decontamination Solutions.

ARE YOU IN COMPLIANCE?…hazardous waste operations And emergency response. - 1910.120 1910.120(k)(2)(i)

A decontamination procedure shall be developed, communicated to employees and implemented before any employees or equipment may enter areas on site where potential for exposure to hazardous substances exists.