Download video for iPod.

Close HD Video

Download video for iTunes.

270005 Specialty Spill Control, Acid Neutralizer Spill Kit Spilfyter brand Specialty Spill Kit product.

Grab & Go® Spill Kit for Acids (Dry Formula)

Product Gallery

Related Products

270001  670001  270006  S2-34 

MSDS Files

270005.pdf

Product Data Sheets

View data sheet

Additional Resources

NEUTRALIZATION GUIDE.pdf

CHEMICAL APPLICATION CHART.pdf

Product Video

Play HD Video
High Speed Connection

Play Small Video

Tech Specs

PackagingBucket - 48/pallet
Width
Length
Thickness
Weight20lbs • 9kg

Usage

Grab & Go® Spill Kits are packed in a 5 gallon plastic bucket for easy portability and disposal of spill clean-up materials. Available in Dry or Liquid Acid Formulas.

INSTRUCTIONS FOR USE:

HOW TO USE CLASSIFIER STRIPS: 1. Keep Classifier dry until ready to use to avoid premature activation of the test strips. Avoid touching or contaminating test area on strip. 2. Wastewater tests can be conducted in stages or all at once by removing one or more of the TABS. 3. Fan Classifier in gas zone just above the level of solution to be tested. Observe test results.* 4. Dip Classifier vertically into solution (test end first). 5. Leave test strip in solution for 30 seconds, swishing if possible. 6. After removing test strip from solution IMMEDIATELY LAY FLAT on Color Chart.** * Classifier Strips are intended to be used for one wet testing procedure. Testing for vapors is considered part of a single test. ** If Classifier is dipped or held in the incorrect position, bleeding from Test #1 may interfere with tests #2, #4 and/or #5. STABILITY AND STORAGE Remove only as many strips as are required and reseal the container immediately after use. Do not touch test papers! Avoid exposing the strips to sunlight and moisture. Store the container in a cool dry place 68°F or 20°C. Original color of test papers may vary. (Exp. Date due to oxidizer test lifespan.) INTERFERENCES Concentrated acidic solutions tend to totally destroy indicators impregnated in papers. Bleeding of the indicator dyes and extreme pH values are good evidence of indicator dye destruction. In the event of such a strong solution dilution may be needed for an accurate analysis. Heavy oils may saturate test papers and mask test colors. Opaque solutions may mask colors. Lightweight organic solvents may contaminate and cause the blue indicator to bleed in TEST #4 (Chemical) or TEST #3 (Wastewater). Volatile organics may vaporize before reading can be made. Test #2 – Oxidizer test-strongly acidic, basic solutions, may cause false positives. Test #3 – Fluoride test-Chlorates, Bromates and Sulfates result in whitening of the test paper if present in large quantities. Test #5 – Free HNO2 (not nitrite ions) may cause false positives.

HOW TO USE KOLOR-SAFE® DRY ACID NEUTRALIZERS: 1. Evacuate employees from the spill area. 2. Wear personal protective equipment compatible with chemicals involved. 3. Ventilate the contaminated area. 4. Contain the spill with universal sorbent material. 5. Slowly sprinkle or pour the acid neutralizer on the spilled acid. 6. CAUTION: Some HEAT or GASSING OUT may be generated. 7. The color change indicator changes from LIGHT PURPLE to YELLOW during neutralization. Color change must occur. 8. Apply dry acid neutralizer until the color change indicator first turns a purplish color (Orangish pink with Phosphoric acid). Do Not Over-Neutralize. NOTE: Very concentrated solutions will yield solid precipitates before the color change. 9. Allow neutralized liquid to cool. Then soak up remaining neutralized liquid with sorbent materials and place used sorbents into temporary disposal containers. 10. Wipe up residue with non-woven cloth material. 11. Dispose of all used articles (sorbents, neutralized liquid, etc.) according to local, state and federal regulations. NOTE: Depending on the extent of the clean-up process, additional equipment may be required. CAUTION: Do not use KOLORSAFE® Dry Acid Neutralizer on any solution containing (in any form) hydrofluoric acid or hydrazine.

ABSORBS UP TO 3 GALLONS/12 LITERS PER KIT

Components

• (3) 3”x4’ Hazmat Socks (S2-30) • (10) 12”x12” Hazmat Pads (S2-71) • (10#) KOLOR-SAFE® Dry Acid Neutralizer (440010) • (2) Chemical Classifier Strips (570010) • (1) Chemical Classifier Chart (577777) • (1) Scoop w/Detachable Scraper • (1 pr.) Nitrile Gloves • (1 pr.) Splash Goggles • (1) Disposal Bag & Twist Tie • (1) 5 Gallon Plastic Bucket with Snap-On Lid