MATERIAL SAFETY DATA SHEET

 

SPILFYTER¨ Products                                                                                                         Page 1 of 5

FORMALDEHYDE Solidifier                                                                                                       Revision Date: 07/27/05

MSDS No. 1085

Section 1. Chemical Product and Company Identification

 

            Product Number: 480001, 480005

                        Product Name: FORMALDEHYDE Solidifier

        

            Manufacturer:                                                           Emergency Telephone Numbers:

            NPS Corporation                                                        CHEMTREC--Domestic (800)424-9300 24 hours

            3303 Spirit Way                                                                      --International (202)483-7616 24 hours

            Green Bay, WI 54304                                                Information (800) 558-5066 7:30am-4:30pm CDT M-F

Section 2. Composition/Information on Ingredients

 

CAS Registry #                       Component                                                                 

            57-13-6                                   Urea                                                   

                                                                                               

 

(NOTE: See Section 8 of this MSDS for Exposure Guidelines)

Section 3. Hazards Identification

 

 

Emergency Overview

Ammonia odor, white crystaline solid. This material presents little or no

hazard if spilled and exhibits no unusual fire hazard.  

 

 

Potential Health Effects

            Eye:     May cause slight irritation.

Skin:    May cause slight irritation.

Inhalation: Exposure to dust levels exceeding the PEL (see Section 8) may cause slight irritation

to the upper and lower respiratory system.

            Signs and Symptoms:

á      Eyes: Redness, Tearing

á      Skin: Redness

á      Inhalation: Shortness of breath, Labored breathing

Section 4. First Aid Measures

            Eyes:   Immediately flush with plenty of water for at least 15 minutes. If irritation persists, seek medical

                        attention.

            Skin:    Brush off excess powder with a dry towel. Wash affected area with plenty of soap and water for several

minutes. If skin irritation develops or persists, seek medical attention.

            Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give

                        oxygen. Seek medical attention.

            Ingestion: If swallowed, call a physician or poison control center immediately.

 

 

 

MATERIAL SAFETY DATA SHEET

 

SPILFYTER¨ Products                                                                                                                     Page 2 of 5

FORMALDEHYDE Solidifier                                                                                                                   Revision Date: 07/27/05

MSDS No. 1085

Section 5. Fire Fighting Measures

            Flash Point: NA

Flammable Limits: NA

            Auto-ignition Temperature: NA

NOTE: This material is non-combustible as supplied and does not support combustion.

Extinguishing Media:  Any extinguishing media can be used for the packaging.

Special Fire Fighting Procedures:       For large fires or fires in confined areas, full emergency equipment with

self-contained breathing apparatus and full protective clothing should be

used. Thermal decomposition will produce carbon monoxide and carbon dioxide.

Section 6. Accidental Release Measures

Avoid breathing or generating airborne dust. Avoid contact with skin and eyes. If unused material is spilled, collect by sweeping, shoveling or vacuuming and recycle the material for use. If this product is mixed with other materials, see Section 13.

Section 7. Handling and Storage

Store in a dry place.

Section 8. Exposure Controls/Personal Protection

Exposure Limits:         None specifically developed for this product: treated as a nuisance dust as defined in 29 CFR 1910.1000.

                        OSHA PEL:    Total Dust is 15 mg/M3.

Respirable Fraction is 5 mg/M3.

ACGIH TLV is 10 mg/M3.

 

The end-user must determine the specific types of personal protective equipment needed according to 29 CFR 1910.132—Personal Protective Equipment (PPE) for General Industry. The following are only suggestions:

á      Eyes: Splash goggles recommended.

á      Skin: Nitrile gloves reccomended.

á      Inhalation: Air purifying respirator with appropriate chemical cartridge or canister

Adequate ventilation should be provided to limit the threat of inhalation.

Section 9. Physical and Chemical Properties

            Appearance: White crystalline solid

            Odor: Ammonia odor            

            Boiling Point: NA                                                                 

Vapor Pressure (mmHg): NA                       

            Vapor Density: NA                                                                                                               

            Solubility in Water: Appreciable                                                       

Specific Gravity (H2O=1): 1.32

            Melting Point: 1350 F

            pH: NA

            Evaporation Rate (Butyl Acetate=1): NA

% Vaporizable by volume (H2O=100): 0

 

 

MATERIAL SAFETY DATA SHEET

 

SPILFYTER¨ Products                                                                                                                     Page 3 of 5

FORMALDEHYDE Solidifier                                                                                                                   Revision Date: 07/27/05

MSDS No. 1085

Section 10. Stability and Reactivity

            Stable: Yes

Conditions to Avoid: None known

Incompatibility (Materials to Avoid): Strong Oxidizers

Hazardous Decomposition or Byproducts:     Thermal decomposition produces carbon monoxide and carbon dioxide.

Hazardous Polymerization: Will not occur

Section 11. Toxicological Information

            This product is not listed by NTP or IARC. See Section 15.

Section 12. Ecological Information

            No data available. See section 15.

Section 13. Disposal Considerations

            This product in itself is considered to be non-hazardous as defined by RCRA (40 CFR 261). Once used, this

product may take on the characteristics of the chemical(s) it was used with and should be disposed of accordingly. Disposal of this product (used or unused) must be in compliance with all local, state, and federal regulations.

Section 14. Transport Information

            This product is not a DOT Hazardous Material and is not regulated for all shipping purposes

Section 15. Regulatory Information

 

            TSCA Inventory Status: All components are listed on the TSCA list.

            SARA Title III

                        Section 302 Extreme Hazardous Substance List: Not listed

                        Section 311/312 Hazard Classification:

                                    Immediate (acute): No

                                    Delayed (chronic): No

                                    Fire: No

                                    Sudden Release of Pressure: No

                                    Reactive: No

                        Section 313 Toxic Chemicals: Not listed

            USEPA CERCLA—Reportable Quantity (RQ): Not Listed

            RCRA Hazardous Waste: Not listed

State/IntÕl Right-to-Know Regulations: Not listed

 

 

 

 

                       

 

 

 

 

 

 

MATERIAL SAFETY DATA SHEET

 

SPILFYTER¨ Products                                                                                                                     Page 4 of 5

FORMALDEHYDE Solidifier                                                                                                                   Revision Date: 07/27/05

MSDS No. 1085

Section 16. Other Information

            Abbreviations:

CFR: Code of Federal Regulations

                        OSHA: Occupational Safety and Health Administration

MSDS: Material Safety Data Sheet

PEL: Permissible Exposure Limit NA: Not Applicable

                        ACGIH: American Conference of Governmental Industrial Hygienists

TLV: Threshold Limit Value

NTP: National Toxicology Program

                        IARC: International Agency for Research on Cancer

                        RCRA: Resource Conservation and Recovery Act

                        TSCA: Toxic Substances Control Act

SARA: Superfund Amendments and Reauthorization Act

USEPA: United States Environmental Protection Agency

CERCLA: Comprehensive Response, Compensation, and Liability Act

DOT: Department of Transportation

WHMIS: Workplace Hazardous Materials Information System

NFPA: National Fire Protection Association

HMIS: Hazardous Material Information System

 

NFPA Ratings:                                                                       HMIS Ratings:

            Health: 1                                                                                 Health: 1

            Fire: 0                                                                                     Flammability: 0

            Reactivity: 0                                                                           Reactivity: 0

            Special Hazard: None                                                             Personal Protection: X

 

NOTE: This MSDS has been prepared only for the FORMALDEHYDE Solidifier (480001, 480005) of SPILFYTER¨ Products. The MSDSÕs of the chemicals used with this product must be reviewed completely, and precautions taken as described.

 

The information accumulated herein has been compiled from sources believed to be reliable and is accurate to the best of our knowledge. However, NPS Corporation cannot give guarantees regarding the information from sources, and expressly does not make any warranties, nor assumes any liability for its uses of this product.

 

Disclaimer

You have purchased SPILFYTER¨ products from NPS Corporation

You have been provided data, product labels, MSDSÕs, and other information about SPILFYTER¨ Products.

 

Some SPILFYTER¨ Products are hazardous. Information about SPILFYTER¨ Products that are hazardous is furnished without guarantee. NPS Corporation does not guarantee the accuracy of the information about hazardous SPILFYTER¨ Products.

 

Those products are only to be used by people having expertise in using the hazardous products.

 

 

MATERIAL SAFETY DATA SHEET

 

SPILFYTER¨ Products                                                                                                                     Page 5 of 5

FORMALDEHYDE Solidifier                                                                                                                   Revision Date: 07/27/05

MSDS No. 1085

The information provided about the hazardous products is believed to be correct. You must perform your investigation as to the safety, toxicity, suitability, and proper shipping method for any hazardous SPILFYTER¨ Product.

 

No guarantee, expressed or implied, is made by NPS Corporation about the results of use of its products. No guarantee is made as to the safety and toxicity of any SPILFYTER¨ Product.

 

NPS Corporation does not assume any liability arising out of use of SPILFYTER¨ Products. Additional information and research may be necessary before you use the SPILFYTER¨ Products. NPS Corporation

is not responsible for damages, direct or indirect, resulting from the use of SPILFYTER¨ Products or from reliance on data in the MSDS or product label.

 

If you resell SPILFYTER¨ Products, you must, by law, furnish your customers a copy of MSDSÕs and handling instructions.

 

You are also required by law to insure that all SPILFYTER¨ Products are properly shipped.

 

SPILFYTER¨, KOLLECT-A-KEM¨, HANDS-IN-BAG¨, KOLORSAFE¨, and GRAB&GO¨ are all registered trademarks of NPS Corporation

AQUALOCKITª, TRUK-KIT ª, DRAINGUARDª, GAPSEALª, MEDICLEANª, and TIDYMATª are all trademarks of NPS Corporation

 

 

Copyright 2001, NPS Corporation